• info@monikainternational.com
  • +91 88248 03088

Fiber Glass Mesh

Mesh for good work...
    You are here:  
  1. Home
  2. Products
  3. Fiber Glass Mesh
Healer for Cracking Walls

Fibre Glass Mesh

Fiberglass Mesh Fabrics

“MONEX” fiber glass mesh is used for reinforcement surfaces during plastering, installation leveling floors, waterproofing, restoration of cracked plaster in order to prevent cracking or fraying of the plaster.

Fiberglass mesh is cheap material that does not burn and is characterized by both low weight and high strength. These properties allow it to be successfully used in the formation of plaster facades, as well as use on internal wall and ceiling surfaces. This material is widely used for fastening the surface layer at the corners of the room. Most widely used standard fiberglass plaster mesh is the density of 145g/m2 for interior and exterior cladding and facade work. Resistant to alkalis, does not decompose and will not rust over time, it does not emit toxic and harmful substances, has a high resistance to tearing and stretching, protects the surface from cracking and improves its mechanical strength.

Easy to handle and use. This comes in width-150 mm to 1000 mm ; length- 50 meters size. The thickness of the mesh is 45 GSM to 145 GSM.

These products can be widely used in reinforcing light wallboard, internal and external wall, building component and plaster products; besides, they can also be sticked on the back of mosaic, marble and other stone materials of superior-quality.

They are the most ideal building materials for reinforcement and are widely used during the innovation process of building materials for external wall.

Our Monex Brand introduced by " MONIKA INTERNATIONAL " fiberglass mesh of outdoor and indoor application which meet the European quality demands.

Fiberglass Mesh Monex 45 GSM - 2.5X2.5

It is coated with alkali-resistant liquid and possesses properties of high strength，good cohesion，and anti-alkali. fiberglass mesh is the ideal constructions material for EIFS（exterior insulation and finish system）,widely used for wall reinforcement，roof waterproof. It can also reinforce cement，plastic，plaster，marble，mosaic，etc

Application:

  • External thermo insulating composite system (ETICS) & External Insulating Finish System (EIFS)
  • External & Internal Plaster Reinforcement.
  • Marble Slab Reinforcement.
  • Asphalt reinforcement (Roof waterproofing)
  • Reinforce lightweight: construction boards.

Characteristics:

  • Coated Alkali Resistant Fiber Glass Mesh
  • Grid Size: 2.5mm*2.5mm
  • Yarn Tex ( tex ): Warp-66, Weft-33
  • Density: Warp-10
  • (Counts per 25mm or linch) Weft-10
  • Treated Woven mass G/m2: 45g/m2
  • Woven Structure: Leno
  • Resin Content (%): 18%
  • Tensile Strength: Warp->600
  • (N/5cm*20cm) Weft->420

Fiberglass Mesh Monex  80 GSM -5X5

This material is used as reinforcing element in carrying out any indoor spackling work on walls and ceilings including places of junction doors and window frames with walls.

Application:

  • Indoor spackling
  • All-over reinforcement of gypsum plasterboard
  • Repair of cracks on ceilings and walls
  • Waterproofing work

Characteristics:

  • Density: 80 g/m ²
  • Mesh size: 5 x 5 mm
  • Roll length: 1 x 50 m

Fiberglass Mesh Monex 110-5x5

This material effectively reduces  stresses  in the systems of so called "warm floor" caused by temperature and humidity changes and also increases  mechanical strength of surfaces, screeds and adhesive layers designed to glazed tiles.

Application:

  • Reinforcing element in self-leveling floor technology
  • Reinforcing element for plaster and protective-decorative coatings in inside and outside application
  • Waterproofing work

Characteristics:

  • Density: 110 g/m ²
  • Mesh size: 5 x 5 mm
  • Roll length: 1 x 50 m

For Universal Application Monex 145 GSM - 5X5

It is one of the most effective reinforcing elements for inside and outside plastering work including technologies of warmth-keeping. Facade mesh fabric effectively perceives deformation stresses arising in stucco layer and ensures long-term protection against cracks.

Application:

  • Reinforcement of surfaces when performing inside and outside plastering.
  • Reinforcement of self-leveling floors and waterproofing systems of buildings.
  • Providing high strength to outside warmth-keeping systems.

Characteristics:

  • Density: 145 g/m ²
  • Mesh size: 5 x 5 mm
  • Roll length: 1 x 50 m

Advantages of Fiber Glass Mesh:

  • Fiberglass Mesh has many advantages such as high Strength, Alkali Resistant Water Proof
  • Fiberglass Mesh in soft in nature and very convenient to use
  • Heat and Fire resistant
  • Fiberglass is not attacked by most chemicals nor is it adversely affected by fungus, bacteria or insect attack.
  • High tensile strength
  • Cost effective
  • Metal free composition
  • User friendly application
  • Corrosion and rust resistant

Storage:

  • Store rolls in a cool, dry location.
  • Store away from the direct contact with ground and concrete.
  • Store out of direct sunlight.

Packaging:

Coated Alkali Resistant Fiberglass Mesh Cloth is wound in paper tubes. The quantity of fabric wound is 50m and a width of 1m. Each roll is packed in a shrink film or plastic bag.

Let’s Have a Chat

Contact Us

  • Trade Inquiry : +91 98298 86307
  • info@monikainternational.com

MONIKA INTERNATIONAL

364, Narayan Vihar, Block-F, Gram - Asarpura
Gopal Pura bypass road, Sanganer, JAIPUR 302023